|
|
Gauge Information
Gauge Description:
There is a gauge located on the downstream river right bridge piling at Newton Factory Bridge Road. You can get down it above 0.5. Realistic minimum is 1.0. It gets pretty big above 2.0.Please add more gauge info in the comments section at the bottom of the page.
The USGS gauge is located about 15 miles upstream. It usually takes the water a day to get from the USGS gauge to Factory Shoals park.
From Rob Maxwell off of boatertalk:
Since no one else will give you the levels
Forum: BoaterTalk
Date: Mar 12 2004, 14:34 GMT
From: rangerrob
Gauge under the put-in bridge.
Minimum: 1.0 (450 cfs)
Perfect 1st timer: 1.4'
Maximum 2.0'
Expert: 2.0+
I've never run the Alcovy, but this is from some notes I have collected.
Hope this helps -- Rob
Report - Reports of Alcovy 3- Factory Shoals and related gauges
Reports give the public a chance to report on river conditions throughout the country as well as log the history of a river.Reports
| When | River/Gauge | Subject | Level | Reporter |
|---|---|---|---|---|
| Alcovy [GA] |
Factory Shoals
|
n/a | Brad Roberts | |
| 1y364d11h27m | @Alcovy 3- Factory Shoals [GA] | Account of 02/12/10 | 525 cfs | n/a |
| 5y85d17h06m | Alcovy3- Factory Shoals [GA] |
Alcovys Last Drop
|
1.0 ft | Jason Tarpley |
| 6y354d17h06m | Alcovy [GA] |
Below Last Drop- Wide View
|
1.3 | Will Gosney |
| 7y95d17h06m | Alcovy [GA] |
Factory Shoals - Last Drop
|
1.7 | Charles Spornick |
| 7y211d17h06m | Alcovy [GA] |
Center lines of last drop
|
1.2 | Steve Reach |